During the last two days, we have faced a lot of problems with the sensors of the track. We had two types of interrupts that were causing us problems:-
1. Debouncing Interrupts
2. Fake Interrupts
Problem: We have configured STM32 GPIO ports to Internal Pull-Up. All our sensors cards are powered by the Central Station Card through the CAN bus. We observed that there is some kind of parasitic signal that comes from the booster towards our Central Station which produces a glitch in the power towards the Nodes (Sensors card in this case). Due to this glitch in power, the GPIO ports which were pulled high become low and thus Fake Interrupts are produced. Thanks to Alexis who stayed till 5 in the morning to help us debug the problem.
The first one was solved by making sure that the any interrupts (that is not fake) from the sensors is processed only if there is atleast a gap of 100ms since the last time it was called. For the second one, which is more tricky, we use a simple method (a FreeRTOS task) which checks for glitches. This method was proposed by Samuel and we thank him for assisting with our software.
Right now, we are trying to do all the mapping of Reed Sensors and Lights to the XML Layout of the track. This is required as the central station needs to talk to server giving him with sensor input.
Sur le même sujet :