PCB: step 2

On Monday, I routed the 4×4 PCB I placed on Friday. I choose to put one multiplexer at the top of this cell and another one at the right. So the SDA lines (which come from the STM32, not from the multiplexer) will come from the left and the bottom. I also changed the scheme by removing a pull-up I put between the main multiplexer and the other multiplexers.

I try to use some shortcuts I found such as one that swaps the pins, but after reading the manual, I found that without a change in the part editor, I cannot use it, so I finally change the pins in the scheme

Now, I will copy 16 times this cell and continue routing with the other components

PCB: step by step

On Friday, I continued to place components. I spent some time to put the 4×4 coils precisely (in the same way as for the test PCB. I found some keyboard shortcuts that help me to do this quickly, but of course, I found the best shortcuts on Monday, when most of the work was done. I take a look at Alexis’ work he made on our test PCB and found some toolbars that will be very useful for me.

Now, I will try to place the multiplexer and to route it. Then I will copy this 4×4 grid sixteen times to finish the PCB until placing and routing the unique components.